Table of Contents
Advertisement
MAC Address Filter: Check to enable MAC
address filter.
Access Policy: Select one number from the
drop-down menu.
Enable: Check to enable the access policy.
Clear the Policy: Click "Clear" button to clear all
settings for the policy.
Filter Mode: Click one radio button to enable or
disable to access the Internet.
Policy Name: Enter a name for the access policy
selected.
MAC Address: Enter the MAC address you want to
run the access policy.
Times: Select the time range of client filter.
Days: Select the day(s) to run the access policy.
Apply： Click to make the settings go into effect.
For example:
If you want to configure the host with MAC address
00:C0:9F:AD:FF:C5 not to access the Internet at 8：
00-18：00, you need to set it as above.
12.4 Prevent Network Attack
This section is to protect the internal network from
exotic attack such as SYN Flooding attack, Smurf attack,
LAND attack, etc. Once detecting the unknown attack,
the Router will restrict its bandwidth automatically.
The attacker's IP address can be found from the
"System Log".
3G 300Mbps Wireless Router
79
Advertisement
Table of Contents
