be turned off. AP will not respond the WPS client's
requests and the set the security mode as WPA
mode.
7.5 WDS Settings
WDS (Wireless Distribution System) is used to expand
wireless coverage area. This Router provides three
modes: Lazy, Bridge and Repeater.
Lazy: In this mode, the connected device can be Bridge
mode or Repeater mode and enter the Router's BSSID
to establish the connection.
Bridge Mode: You can wirelessly connect two or more
wired networks via this mode. In this mode, you need to
add the Wireless MAC address of the connecting device
into the Router's AP MAC address table or select one
from the scanning table.
Repeater Mode:In this mode, add the opposing MAC
address into each own AP MAC address table by manual
3G 300Mbps Wireless Router
56