Samsung HT-D4500 User Manual page 20

5.1ch blu-ray home entertainment system
Hide thumbs Also See for HT-D4500:
Table of Contents

Advertisement

Available languages

Available languages

Connections
Red
Blue
COMPONENT OUT
WIRELESS LAN
WIRELESS LAN
AUX IN
AUX IN
5V 350mA
5V 350mA
METHOD 2: Component Video (BETTER QUALITY)
If your television is equipped with Component Video inputs, connect a Component video cable (not
supplied) from the Component Video Output (P
Component Video Input Jacks on your TV.
NOTE
You can select from a variety of resolution settings such as 1080i, 720p, 576p/480p and 576i/480i,
depending on the disc type. (See page 26)
The actual resolution may differ from the setting in the Setup menu if both Component and HDMI cables are
connected. The resolution may also be different depending on the disc. (See page 26)
After making the video connection, set the Video input source on your TV to match the corresponding Video
output (HDMI, Component or Composite) on your product.
See your TV owner's manual for more information on how to select the TV's Video Input source.
If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote
control and select COMPONENT as the external source of the TV.
In DVD playback, if both HDMI and Component jacks are connected and you select the Component 1080p,
1080i, 720p or 576p/480p mode, the Display Setup menu will show the output resolution as 1080p, 1080i,
720p or 576p/480p in the menu. The resolution is actually 576i/480i.
METHOD 3 : Composite Video (GOOD QUALITY)
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO
IN jack on your TV.
NOTE
The VIDEO source is always output in 576i/480i resolution regardless of the resolution set in the Setup
menu. (See page 26)
After making the video connection, set the Video input source on your TV to match the corresponding
Video output (HDMI, Component or Composite) on your product.
See your TV owner's manual for more information on how to select the TV's Video Input source.
If you have set the product's remote control to operate your TV, press the TV SOURCE button on
the remote control and select VIDEO as the external source of the TV.
!
CAUTION
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by
copyright protection systems and the picture will be distorted on the television.
0
English
Green
FM ANT
FM ANT
HDMI OUT
HDMI OUT
Yellow
VIDEO OUT
, P
R
METHOD 2
METHOD 3
and Y) Jacks on the back of the product to the
B

Advertisement

Table of Contents
loading

Table of Contents