Rj11 Cable; Removing The Rj11 Cable - Toshiba Satellite L670D Maintenance Manual

4 Replacement Procedures
4.20

RJ11 Cable

Removing the RJ11 Cable

Remove the RJ11 cable according to the following procedures and Figures 4.32 and 4.33.
1. Remove one tape from the logic lower assembly.
2. Pull out the RJ11 cable from the routing channel on the logic lower assembly.
Figure 4.32 Pulling out the cable from the routing channel
Satellite L670D/L675D/Pro L670D Maintenance Manual [CONFIDENTIAL]
4.11 USB Board
Tape