Weslo pursuit sct 4.4 User Manual page 9

7. Orient the Saddle (26) as shown.
Slide the Saddle (26) onto the Saddle Carriage
(25); make sure that the Saddle is level and is
pointing straight ahead. Then, tighten the two
M8 Hex Nuts (B).
8. Orient the Handlebar Post (10) as shown.
Locate the Adjustment Knob (22) on the front of
the Frame (21). Loosen the Adjustment Knob
and pull it outward. Then, insert the Handlebar
Post (10) into the Frame.
Move the Handlebar Post (10) upward or
downward to the desired position, release
the Adjustment Knob (22) into an adjustment
hole in the Handlebar Post, and then tighten
the Adjustment Knob. Make sure that the
Adjustment Knob is firmly engaged in an
adjustment hole.
7
26
B
8
9
25
10
21
22