Table of Contents
Advertisement
2. If there are shipping tubes (not shown) attached
to the Frame (21), remove and discard the ship-
ping tubes and the hardware attaching them.
Orient the Front Stabilizer (4) so that the wheels
(A) are in the position shown.
Tip: Identify the M8 Washers (2) and the M8
Black Washers (not shown). Do not confuse
the M8 Washers with the M8 Black Washers.
Attach the Front Stabilizer (4) to the Frame (21)
with two M8 x 60mm Carriage Bolts (3), two M8
Washers (2), and two M8 Acorn Nuts (1).
3. Tip: Identify the M8 Washers (2) and the M8
Black Washers (not shown). Do not confuse
the M8 Washers with the M8 Black Washers.
Attach the Rear Stabilizer (6) to the Frame (21)
with two M8 x 60mm Carriage Bolts (3), two M8
Washers (2), and two M8 Acorn Nuts (1).
2
3
1
2
21
6
3
7
1
21
2
4
A
A
3
Advertisement
Table of Contents
