Download Print this page

Troubleshooting - Nesco NC5611 Steam Pro II Instruction Manual

1750 w 230 v 50/60 hz

Advertisement

Available languages

Available languages

Problem
The
security
device
does not work.
A noise originates pipe
of steam but the produced
steam is weak.
Spray head is leaked.
Hooking connection of
steam pipe is leaked.
Water spilled out water
tank.
Steam is weak.
Water tank is in distortion.
N o s t e a m b u t t h e
i n d i c a t o r i s l i g h t e d .
15
Trouble shooting
Cause
One of the circuits has
fault, the plug is loose,
the fuse burned.
The pipe is twisted
below level to iron.
The head is broken, or
the ironing is vertical.
The cushion can be
damaged itself with the
aging,
the
junction
interface loosen itself.
Water tank is broken or
has a hole.
The power source is lower
or deposits can obstruct
the arrival pipe.
Over heated water is
put. Or other chemical
element is put
The steam creator is
broken.
The
internal
electric
component is broken.
Solution
Check and maintain by
specialized technician.
Raise the steam pipe
(residual water in top
returns into the device).
Replace
the
spray
head. Move from top
down to operate.
Replace the cushion.
Rotate the junction of
steam pipe tightly.
Replace the water tank.
Add
a
stabilizer
power source. Use a
cleaning respecting the
environment.
Continue to use.
Replace the water tank.
Call
a
specialized
technician to do an
examination.
of

Advertisement

loading