Download Print this page

Cleaning And Care - Nesco NC5611 Steam Pro II Instruction Manual

1750 w 230 v 50/60 hz

Advertisement

Available languages

Available languages

Brush
- Using the brush head to achieve a better ironing result.
- Remind:Brush head is assembled to ensure that before the steam head is cold.
- Install brush head method:Steam panel upward direction, Brush attachment is
gentle buckle down, Fastened the brush will have when the voice of clatter.(1)
- When ironing, should be from top to end. (see picture) (2)
- Before remove the brush, please power off the power control switch, when
there is no steam from the steam brush, remove the brush, please note do not
touch the stainless steal panel, avoid scald hand.
Splint
- Splint can help iron hem and cockle easily.
- Install the splint on the steam brush, push it tightly to its position.(see picture) (3)
- Hold the steam brush, open the splint.(see picture) (4)
- Put the cloth between splint and steam brush.(see picture) (5)
- Release handle, made it clamp cloth, ironing from upside to downside.(see
picture)
- Before remove splint, please power off the power control switch, when there is
no steam from the steam brush, remove the brush, please note do not touch the
stainless steel panel, avoid scald hand.
Storage
- After using, remove the water tank from the body, dump the water in the water
tank. - Make the appliance dry working 5 minutes. Make the boiler dry.
- Power off the power switch,(power indicate lamp will be off),remove the power
cord from the socket,
- Warning: please do not touch the steam brush before it cool down, let the
boiler dry before storage.

Cleaning and care

Cleaning
- Please use a wet rag clean the body. In order to make your product always
have a good capability, should clean the scale timely, the period depend on
the using period. Clean water tank at least once per year, or once
per 100 hours. The process for clean the scale is as below:
* Remove the water tank, wash the scale at water base with clean water.
* Open the water tank base knob, dump mixture in the water tank then wash
with clean water.
- After clean the scale, if you think there is still scale, please repeat the above
process.
14

Advertisement

loading