Advertisement
5、Interface definition(See appendix)
1. Power input：Supply the working power to chassis from power board.
2. Background light control panel interface ： Control the switch and
brightness of screen background light.
3. Remote board interface：Support NEC receiving negotiation.
4. Control panel interface：7 button control.
5. Sound output：Output Sound to loudspeaker.
6. Software upgrade interface：Upgrading software, only used in factory.
6、Factory mode instruction
This chassis use Prima remote controller, the method to enter the factory
mode is: INFO-----P.MODE------S.MODE------SLEEP.
FAC. MENU
Name
WHITE BLC
COLOR TEMP
PWR. STB
TEST PAT.
TV INIT
E2P INIT
VERSION
BUS-SEL
Please DONOT adjust these options below:
DEBUG MENU
Name
Image mode
Audio mode
VOL SET
SAVE
M.CLK
AGC
ENABLELOGO
E2P SET
EMI
Description
Bright or Dark balance adjustment
Color temp. adjustment
ON:Stand-by at Power-on OFF:cancel
Image test
Initialize factory TV frequancy
Initialize EEPROM
Show the version of software
N.G.
Description
Image mode preferences adjustment
Sound mode preferences adjustment
Volume preferences adjustment
Save power preferences adjustment
DRAM clock adjustment
AGC preference adjustment
Show LOGO at the time of no signal
Adjust EEPROM data
EMI test
Advertisement
