Table of Contents
Advertisement
Title assignment
• If you try to assign titles to more than 30 station
frequencies, "Name Full" appears. Delete unwanted
titles before assignment.
Available characters
Upper case
Lower case
Numbers and symbols
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service center.
Symptoms
• Sound cannot be heard from the speakers.
• The unit does not work at all.
• "Connect Error" appears on the display.
• SSM automatic presetting does not work.
• Static noise while listening to the radio.
Downloaded from Caradio-Manual.com Manuals
General settings—PSM
• "Auto" setting for "Dimmer" may not work correctly
on some vehicles, particularly on those having a
control dial for dimming.
In this case, change the "Dimmer" setting to any
other than "Auto."
• If "LCD Type" is set to "Auto," the display pattern
will change to the "Positive" or "Negative" pattern
depending on the "Dimmer" setting.
• If you change the "Amp Gain" setting from
"High PWR" to "Low PWR" while the volume level is
set higher than "Volume 30," the unit automatically
changes the volume level to "Volume 30."
Remedies/Causes
• Adjust the volume to the optimum level.
• Check the cords and connections.
Reset the unit (see page 3).
Remove the control panel, wipe the connector, then
attach it again (see page 4).
Store stations manually.
Connect the antenna firmly.
Continued on the next page
REFERENCE
33
Hide quick links:
Advertisement
Table of Contents
