Warning: Failure to install the screws or fixing device in accordance with these instructions may result in electrical hazards. Accessible parts/ light bulbs may become hot when used with cooking appliances. R60FS, R60FW, R90FS & R90FW Fixed Rangehood User Manual Page 1...
4 screws (M4*35). 3. Install the adjusted board on the bottom of the hood in order to keep out the gap between hood back and cupboard. Page 2 R60FS, R60FW, R90FS & R90FW Fixed Rangehood User Manual...
Page 5
2. Vertical ventilation: As pic B shown, please use the cover to seal the outlet on the back, then the air can be vented from top. R60FS, R60FW, R90FS & R90FW Fixed Rangehood User Manual Page 3...
4. Push the High button, the motor runs at high speed. 5. Push the light button and the two lights will come on. Push it again and the lights will turn off. Page 4 R60FS, R60FW, R90FS & R90FW Fixed Rangehood User Manual...
Keep the motor and other spare parts free from water, as this will cause damage to the appliance. To disassemble and assemble the filter, please refer to the below picture. To change the light, press the lamp cup, take out the bulb counter-clockwise. R60FS, R60FW, R90FS & R90FW Fixed Rangehood User Manual Page 5...
Need help?
Do you have a question about the R60FS and is the answer not in the manual?
Questions and answers