Pathos Acoustics Converto User Manual page 10

Configuring for Direct Sound with Windows XP
Connect HiPort USB to I2S interface to your PC.
Then, go to the Control Panel and launch the Sound and
Audio Peripherals utility. Select the Audio tab. In the
Predefined Peripheral drop-down menu of the Playback area,
select "Pathos HiPort to I2S Interface"
From now on, unless HiPort USB to I2S interface is
disconnected or settings are changed again, Pathos HiPort is
the audio peripheral all audio programs will use when
operating.
Configuring for Direct Sound with Windows Vista or
Windows 7
Open Control Panel and select Hardware and Sounds. Under
Audio, click on Manage Audio Devices. The following
windows will appear, in which hiFace is listed. Set "PATHOS
HiPort USB" as predefined device. Then, click on OK.
Configuring a Mac
Go to System Preferences and select Sounds.
The following windows will appear. Select "PATHOS
HiPort USB"
for output as indicated in Figure 6.
10