Other Devices; Using A Usb Drive; Line In (3.5Mm Audio Input) - iLive IKTD1016 v1620-01 User Manual

Other Devices

Using a USB Drive

1. Load a USB drive into the USB Port on the side of the unit.
2. Press the Source button to switch to DVD.
3. Press and hold the USB button on the unit or press the USB button on the remote to switch to
USB.
4. Use the Arrow/OK buttons to select and play content from the connected USB drive.

Line In (3.5mm Audio Input)

You will need a 3.5 mm audio input cable (not included).
1. Connect a 3.5mm audio cable to the Line In Input on the side of the unit and the audio output/
headphone jack on an audio device.
Power the unit on and press the Source button to switch to Line In.
2.
3. Use the native controls on the connected device to play your audio through the unit.
10
Using a USB Drive - Side View
Line In - Side View
11