Table of Contents
Advertisement
•
End of Page Mode - the printer feeds paper until an "out-of-
paper" condition is found, or a maximum of 14". Use this with
perforated paper.
Windows CE
Windows CE Notes:
1) Serial Handshake – Not used at this time.
2) Port Buffer Size – Controls the largest block of data sent to the
printer port at one time. Set this to the largest value that works
reliably on your CE device (larger=faster).
3) Perforated Paper – Modifies the printable area to assure proper
function when using perforated paper.
4) Display This Dialog When Printing – If "on", settings may be
changed for every print job. To be sure the same settings are
always used, set this to "off." It may be turned "on" again using
the Control Panel.
Windows 2000/XP
Windows 2000/XP Notes:
1) Paper Type Control – Select Cut Sheet, Roll, or Perforated Roll.
This modifies the printable area of all paper sizes (Letter, Legal,
A4, Custom).
2) Using Custom Forms
a.
Select Start:Settings:Printers: select Server Properties.
b. On the Forms Page, create a form for use with custom
paper size.
c.
Allowed sizes:
d. All forms created within these specifications will be
displayed as paper size options.
Cut Sheet Paper Usage
1. Select "Fixed Page" mode.
2. Select the appropriate paper size (Letter, A4, Legal).
3. In Windows 2000/XP, set the Paper Type to "Cutsheet" only.
•
Minimum width = 4"
•
Maximum width = 8.5"
•
Minimum height = 2.00 inches
•
Maximum height = 65,535 print lines.
Page 28
Hide quick links:
Advertisement
Table of Contents
