GreenWorks GB 500 Owner's Manual page 10

ASSEMBLy
ASSEMBLING THE BLOWER TUBE
WARNING
To prevent accidental starting that could cause serious personal injury, always remove the battery
pack from the tool when assembling parts.
1. Align either of the grooves on the tube with the tabs on the blower housing. Push the tube onto
the blower housing until the tab engages the grooves (fig. 2).
Tube
2. Turn the tube in the direction of the arrow until both of the tabs slide into the lock positions .
Clockwise to Lock and Counter Clockwise to remove (fig. 3).
Unlock
Tab
Groove
Lock
Lock position
10
Fig. 2
Fig. 3