ARH PARKIT Install Manual
  1. Manuals
  2. Brands
  3. ARH Manuals
  4. Security Camera
  5. PARKIT
  6. Install manual

ARH PARKIT Install Manual

Hide thumbs Also See for PARKIT:
Table of Contents

Advertisement

Quick Links

See also: User Manual
k
Page 1
ParkIT Install Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PARKIT and is the answer not in the manual?

Questions and answers

Related Manuals for ARH PARKIT

Summary of Contents for ARH PARKIT

  • Page 1 Page 1 ParkIT Install Guide...

  • Page 2: Table Of Contents

    ParkIT Install Guide Version 1.0 Document version: 11.10.27 Table of Contents Compliances ............................3 1. Hardware overview ........................... 4 2. Install the bracket ..........................6 2.1 Mounting ............................. 7 3. Setting up the camera ........................7 3.1 Power / trigger/ serial connection....................7 3.2 Ethernet connection........................

  • Page 3: Compliances

    Compliances CE certificates: The ARH ParkIT ANPR digital camera family complies with the European CE requirements specified in the EMC Directive 89/336/EEC. The ANPR cameras conform to the following Product Specifications: Emission: EN 55022, EN 55024 Immunity: EN 61000-4-2, -3, -4, -5, -6, -8, -11 Declaration of RoHS Compliance for Electrical and Electronic Products: ARH Inc.

  • Page 4: Hardware Overview

    1. Hardware overview Sunshield Wall bracket Camera with bracket Infrared LEDs Camera optics Infrared LEDs Foot Cover Head Green status LED Light sensor Red status LED Camera front Bracket Page 4 ParkIT Install Guide...
  • Page 5 Bracket Details and Sizes Page 5 ParkIT Install Guide...

  • Page 6: Install The Bracket

    1. Remove the four screws (1) located at the back of the foot. (Use size 4 Allen key). 2. Rotate the foot (2) by 180 degrees. 3. Place the screws back into the holes and screw them back on. NOTE: Do not over tighten the screws. Page 6 ParkIT Install Guide...

  • Page 7: Mounting

    The required input voltage is: 12V DC. Consider voltage drop when using long cables! DC input: 12V nominal (10V..15V), reverse polarity protected Power: 10W Input current: 1.0A (Max 2.5A transients occur for a few μsecs) Over-current protection: by fuse NOTE: Use smooth circular cables only (6-8mm diameter). Page 7 ParkIT Install Guide...

  • Page 8: Ethernet Connection

    The camera is equipped with CAT5 UTP crossover cable with RJ45 plug. It is ready to connect both to PC and network switches directly. NOTE: The RJ45 plug is not weatherproof. 4. Software requirements The ParkIT camera is developed to operate without any kind of special software. Software requirements  Windows or Linux operating system ...

  • Page 9: Accessing The Camera

    6. Configure the Camera The ParkIT camera must be configured before using. With the Configuration Wizard, the camera features (e.g. zoom, triggering etc.) can be set up quickly and easily. Of course, the use of the wizard is optional – camera properties can be set up manually as well.

  • Page 10: Recommended Camera Position

    ANPR, therefore try to avoid settings where the character size is greater than 50 pixels in height. A line width of a character on the image should be at least 2 pixels. Page 10 ParkIT Install Guide...
  • Page 11 A properly set camera should provide a similar image: A proper sample image Proper character sizes (in pixels) on the sample image Page 11 ParkIT Install Guide...

  • Page 12: Maintenance / Storage

    The cameras should be stored in low humidity environment in the temperature range of -35 °C – +55 °C. NOTE: The startup temperature of the camera is -20 °C. Page 12 ParkIT Install Guide...

  • Page 13: Appendix

    2. Enter the ifconfig command to see the reserved Ethernets (e.g. eth0). 3. Enter the following command: ifconfig ethY 192.0.2.25 where Y is a free eth (e.g. eth1) and 192.0.2.25 is a sample IP address. Page 13 ParkIT Install Guide...

  • Page 14: Contact Information

    Contact Information Should you have any problem during operating the ParkIT cameras, our support team is at your disposal. Please try to explain the problem as detailed as possible and do not forget to send the following information to make it easier to help you: ...

Table of Contents