Pentax Optio T20 Operating Manual page 45

Memo
• When Shooting mode is set to \ (Sport) or E (Pet), [Flash Mode] is set to
a (Flash Off). However, the flash mode can be changed.
• When Shooting mode is set to < (Flower), [Focus limiter] is set to Off, but
the setting can be changed.
• When Shooting mode is set to Y (Frame Composite), the number of
recorded pixels is fixed at h and cannot be changed.
1
In Capture mode, touch the LCD monitor.
The [Capture Toolbar] appears.
2
Touch the A (Shooting Mode)
icon.
• The icon of the currently selected shooting
mode appears in place of the A icon.
• The [Capture Palette] appears.
3
Touch the desired shooting mode
icon.
A guide display of the selected shooting
mode appears.
• To skip the guide display, double-touch the
icon. The shooting mode is selected and
the camera returns to Capture mode.
• Touch the arrow icons (qr) to advance to other shooting modes.
• Touch [Palette] to return to the [Capture Palette].
4
Touch [OK].
The shooting mode is selected and the camera returns to Capture mode.
5
Press the shutter release button halfway.
The focus frame on the LCD monitor turns green if the subject is in focus.
6
Press the shutter release button fully.
The picture is taken.
Memo
You can set the display not to show the guide by default (p.137).
Selecting a Shooting Mode
Capture Palette Capture Palette Capture Palette
Night Scene
Used for night
scenes. Use a
tripod, etc. to
prevent shaking
and use a flash
for portraits.
Palette OK
3
43