Keep Your Floormate ® Cordless Running Properly - Hoover floormate Instruction Manual

Keep your FloorMate Cordless running properly: nozzle/filter
®
CAUTION
To reduce the risk of injury from moving parts - remove battery pack before servicing.
! !
1 2 3
Pull the nozzle Rotate the Rinse under running
firmly here nozzle out to water and remove
to release. remove. debris from the
squeegee. Wipe
with a damp cloth.
9
4 5
Tilt the cleaner back
Check foam filter
and pivot the nozzle
for debris. Rinse
back into place. if needed.
Keep your FloorMate Cordless running properly: brushes
®
CAUTION
To reduce the risk of injury from moving parts - remove battery pack before servicing.
! !
CAUTION
Do not use a solvent-based detergent while cleaning brush assembly.
! !
1
2 3
Remove both Lower handle Push the release
tanks to
buttons and
and tilt
prevent spillage.
remove the brush
nozzle up.
assembly.
LUBRICATION
The motor is equipped with bearings which contain
sufficient lubrication for it's lifetime. The addition of lubricant
could cause damage. Do not add lubricant to motor.
4 5 6
Wash with a Align brush post Press the brush in
mild detergent with the hole on firmly until it snaps
and rinse. Do the bottom of the into place.
not use a solvent- cleaner and turn
based detergent. the brushes slightly
until it fits easily.
10