Advertisement
Introduction / Overview
The Power Pack (PP1) & Solar Panel 1 (SP1) provides dependable off-grid power generation to support a variety of
Mantracourt products.
Packaged in an IP67 sealed case with rugged waterproof connectors the PP1 has two sources of charge for the
internal battery with both solar and mains power input charging. The case also features Stainless steel padlock
protectors for easily securing your supply on site.
The PP1 has a single 12 Volt fuse protected output. The mating connector comes pre-fitted with 5 metres of cable
and bare end connections.
The solar panel features hail-proof tempered glass and closely packed polycrystalline cells, sealed into a robust
aluminium frame. The junction box on the rear of the panel does not protrude beyond the frame, so installation can
be simple and neat. The solar cell comes with 5 metres of cable as standard longer lengths are available on request.
The SP1 & PP1 combined are designed to provide a perpetual power supply for a 12 V system drawing an average of
53mA, even during winter.
The PP1 can also be used as a mains powered 12V DC supply with 33Ahr battery back up.
Dimensions & Weight
PP1 Dimensions
PP1 Case materials
PP1 Weight
SP1 Dimensions
SP1 Frame Material
SP1 Weight
Mantracourt Electronics Limited PP1 & SP1 User Manual
339 x 295 x 152 mm
Polypropylene
13 Kg
360 x 510 x 28 mm
Aluminium
3 Kg
339 mm
295 mm
PP1
360 mm
510 mm
SP1
2
Advertisement
