Advertisement
You have purchased a quality industrial product that is designed for high performance
and long service life. If correct use, safety and maintenance procedures are observed
this machine will last for many years.
SAFETY INSTRUCTIONS
KOBE INDUSTRIAL AIR TOOLS have been specifically designed to help you work SAFELY and
EFFICIENTLY. Your care and good judgement are the best protection against injury, but always ensure that
the appropriate safety equipment is worn. All possible hazards cannot be covered here, but the most
important ones have been highlighted.
ALERTNESS
Always stay alert, watch what you are doing and use common sense when operating this tool.
Always make sure you do not get distracted by other people.
Always avoid accidental starting of the tool. Disconnect the tool before adjusting, replacing accessories
or repairing.
Never operate the tool when tired or under the influence of alcohol or prescription/non-prescription
drugs.
SIGHT
Always wear approved eye protection during operation, repair or maintenance of the tool, or whilst
changing accessories. Even small projectiles can injure eyes and cause blindness.
HEARING
Always take measures to eliminate or reduce risks from exposure to noise. High sound levels can
cause permanent hearing loss. Always use approved hearing protection.
RESPIRATORY
Breathing in dust can lead to lung problems. Some dust created by using this tool could contain chemicals
which are known to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
LEAD which can be found in old paint.
CRYSTALLINE SILICA from bricks and cement and other masonry products.
ARSENIC and CHROMIUM from chemically treated timber.
Always avoid inhaling/ingesting dust or handling debris from the work process which can be harmful to
your health.
Always use dust extractors where available, work in a well ventilated area and wear a face mask which
is specially designed to filter out microscopic particles.
HANDS, ARMS AND BODY
Cuts and burns
Always wear gloves to protect hands from cuts and burns.
Always wear shoes which are non-skid. In addition, wear shoes with steel toe caps where there is a risk
of heavy or sharp objects falling on your feet.
Always wear a protective apron capable of stopping small wheel or workpiece fragments.
Never allow sparks to go onto your clothing. Wear wool or flame retardant cotton rather than man made
fabrics.
Never touch parts of the tool or accessories when they are moving. Use gloves when changing
accessories after use.
Vibration and repetitive strain
Repetitive work motions, awkward positions and exposure to vibration can cause "Repetitive Strain
Injuries". If numbness, tingling, pain or whitening of the skin occurs consult a doctor.
Always use appropriate safety equipment and take regular breaks.
Skin disorders
Frequent, prolonged contact with used engine oils may cause dermatitis and other skin conditions,
including skin cancer.
Always wear protective gloves and clean overalls. Never put oily rags into your pockets.
HAIR, CLOTHING & JEWELLERY
Always ensure that all long hair and loose clothing, ties, scarves, jewellery, etc., are secured or
removed.
Never wear watches, rings or bracelets whilst using this tool.
CHILDREN AND OTHER PEOPLE
Always ensure that all others in the area are wearing approved eye, face, respiratory,
hearing and body protection.
2
KOBE
I N D U S T R I A L
RETRACTABLE AIR HOSE
BALANCER
tension return. Retracts when
the air tool is released leaving
the work place clear of
unwanted lengths of air hose.
Ideally suited for in-line
production.
loaded
overhead fixing.
WHIP HOSE AND ADAPTOR
Used to supply air between the
air tool and supply point. Uses
standard couplings. Prevents
vibration damage to couplings
and the tool user. Quick
release coupling.
EXHAUST HOSE ASSEMBLY deflects
the tool exhaust away from the
immediate work area and helps to
reduce sound levels. Suitable
for Kobe air tools. Thread size
1/ 4
Exhaust
Diameter
WATER SEPARATOR continuously removes
moisture from the air supply helping to prevent
corrosion to the internal components of the air
tool. The spring
valve allows
immediate
draining of
reservoir
without
any down time.
Continued on page 3
KOBE AIRLINE ACCESSORIES
AIR TOOLS
With adjustable
With
spring
safety
clip
for
Max Tool
Bore x
Order Code
Rating
Weight
Length
KBE-280
1.5kg
6.35 x 700mm
100PSI
-1000K
Overall
Order Code
Thread
Length
KBE-280
1/ 4
" NPT
650mm
-1360K
" NPT. Overall length 80cm.
Suitable for
Order Code
Kobe Air Tool models
KBE-298
GES2506L, GDA2206L, FDG090,
20mm
-5421S
FDG115, FDG180m & FDG180e.
DP2210, DPR1810, DP513, DPR813,
DAR1510, DS4510L, SH120,
25mm
-5420S
SP1825K, GD2206L, GD22LK,
FPD500, FPD375, FCT003 & X-GD16.
Order Code
Description
KBE-280
1/ 4
BSP Water Separator
-1900K
HEAVY DUTY NYLON AIR HOSE recoils to a
fraction of its working length when not in use
leaving the workplace clear of entanglement
hazards. Solid brass couplings with 360 ° swivel
and spring protectors allow use in any direction.
Nylon
Outside
Normal
Order Code
Length
Connector Diameter
Rating
KBE-280
6mm
7.5m
250PSI
-1140K
1/ 4
BSPT
BSPT
9.5mm
7.5m
150PSI
-1300K
3/ 8
HI-FLEX POLYURETHANE AIR HOSE with brass 360 °
swivel couplings, ideal for use in awkward access
areas. Recoils to a fraction of its working length leaving
the workpiece clear of entanglement hazards.
PU
Outside
Normal
Order Code
Length
Connector Diameter
Rating
KBE-280
BSPT
8mm
7.5m
150PSI
-1160K
1/ 4
-1320K
3/ 8
BSPT
9.5mm
7.5m
150PSI
MINI OILER feeds oil directly into the airline ensuring
your air tool is well lubricated at all times preventing
corrosion. The clear body reservoir allows immediate
inspection of the oil level. All brass construction.
Order Code
Description
KBE-280
1/ 4
BSP Mini Oiler
-1400K
11
Advertisement
