Pentax Optio E60 Operating Manual page 166

Data being processed
No image to be
processed
This image/sound
cannot be processed
No card in the camera
The card memory is not
enough to copy images/
sounds
The built-in memory is
not enough to copy
images/sounds
Cannot process
correctly
Messages such as the following may appear on the display when using
the PictBridge function.
Low paper level in the
printer
No paper in the printer
Low ink level in the
printer
No ink in the printer
Printer error
Data error
Paper stuck in the
printer
9
164
This message appears when the camera takes more than
five seconds to display an image due to image processing,
or when the SD Memory Card or built-in memory is being
formatted.
This message appears when no image/sound file is
present.
This message appears when you attempt to edit a file that
cannot be processed.
This message appears when you select [Image/Sound
Copy] with no SD Memory Card inserted.
This message appears when there is not enough memory
on the SD Memory Card or in built-in memory to copy
image/sound to. Insert a new SD Memory Card or delete
unwanted images. (p.23, p.108)
This message appears when Red-eye Compensation
cannot be performed correctly.
The paper level of the printer is low.
There is no paper in the printer.
The ink level of the printer is low.
There is no ink in the printer.
An error message has been sent from the printer.
A data error message has been sent from the printer.
The paper is stuck in the printer.