Pentax Optio E60 Operating Manual page 106

3
Press the 4 button.
The screen for setting the slideshow
conditions appears.
4
Use the four-way controller (23)
to select [Interval].
5
Press the four-way controller (5).
A pull-down menu appears.
6
Use the four-way controller (23) to change the interval
and press the 4 button.
You can choose from 3sec, 5sec, 10sec, 20sec and 30sec.
7
Use the four-way controller (23) to select [Screen Effect].
After selecting [Screen Effect], press the four-way controller (5).
A pull-down menu appears with the following items that can be
selected. Use the four-way controller (23) to select an item and press
the 4 button.
Off
5
Wipe
Checker
Fade
8
Use the four-way controller (23) to select [Sound Effect].
9
Use the four-way controller (45) to select O (On) or P
(Off).
Except when the screen effect is set to Off, you can choose O (On) or
P (Off) for the sound that is played when one image changes to the next.
10
Press the 4 button.
The slideshow starts using the selected interval and effect.
Sound files made in O(Voice Recording) are not played back in the
slideshow.
• The slideshow will continue until you press any button other than
the 4 button or the power switch.
• Movies will normally be played through to the end before the next
picture is played back, regardless of the interval setting. However,
pressing the four-way controller (5) while playing back a movie
skips to the next image.
• Panoramic pictures are played back scrolling for 5 seconds
regardless of your setting on [Interval].
Playing Back Images on a TV (p.107)
104
No effect
The next image slides over the previous one from left to right
The next image appears in small square mosaic blocks
The current image gradually fades out and the next image fades in
Interval 3sec
Screen Effect Wipe
Sound Effect
MENU OK Start Start