Step7. Film Loading - Pentax MZ-60 Operating Manual

Step 7
30
FILM LOADING
We suggest that you first operate the camera with no film loaded
to become familiar with its operations.
MEMO Remove the protective card
• Before loading film for the first time after purchase, open the back cover and
remove the protective card.
• Be careful not to touch the shutter curtains with protective cover.
• Always load and unload the film in the shade or avoid direct sunshine.
1
To open the back cover,
slide the back cover release
lever down in the direction
of the arrow.
2
Place the film cartridge in
the film chamber as shown
in the illustration.
3
Pull the film leader out far
enough to reach the take-up
spool.