Turning On The Power - Dukane 8979WUA User Manual

Turning on the power

1.
projector and the outlet.
2.
Make sure that the POWER indicator is
lighted in steady orange. Then remove the
lens cover.
3.
Press the STANDBY/ON button on
the projector or the ON button on the
remote control.
The projection lamp will light up and the
POWER indicator will begin blinking in
green. When the power is completely on, the
indicator will stop blinking and light in steady
green.
WARNING
not look into the lens of the projector or look inside of the projector through any
of the projector's openings.
NOTE
Manual - Operating Guide.
POWER indicator
ON button
STANDBY/ON button
User's
9