Compsee apex II Operating & Programming Manual page 23

When the printer option is turned on, the Apex II asks the operator, "Do you wish to Print a
Tag?" when the operator keys (instead of scans) certain fields and when the operator keys
or scans a number that is not already in the data file.
The Apex II displays this prompt for the following fields during data collection procedures:
Asset Inventory:
Major Division
Minor Division
Item Number
Item Track:
Destination
Item Number
Physical Inventory:
Location
Item Number
Perform the following procedure from the Set Options menu (page 22) in the program whose printing options you
wish to set.
1. Press the<P> key.
The Printer Choice screen is displayed, prompting you to select the printer you
are using.
2. Select the printer that is connected to your Apex II..
The Barcode Printing screen is displayed, prompting you to turn Location
barcode tag printing on (Yes) or off (No).
If necessary, press the arrow keys to place parentheses around Yes or No.
Parentheses toggle between being displayed around Yes and No as the arrow
keys are pressed.
3. Press <ENTER>.
The screen prompts you to turn Item barcode tag printing on (Yes) or off (No).
4. If necessary, press the arrow keys to place parentheses around Yes or No. Then press <ENTER>.
The Header 1 screen displays the first line of the header for the current
program.
Compsee
Apex-0698-Part 2: Apex-trak
Note
P r i n t e r C h o i c e
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
> R e n e g a d e 9 4 9 0
T r a n s p o r t P 2 2 4 2
B a r c o d e P r i n t i n g
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
L o c a t i o n T a g s
Y e s ( N o ) _
B a r c o d e P r i n t i n g
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
L o c a t i o n T a g s
( Y e s ) N o _
B a r c o d e P r i n t i n g
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
I t e m T a g s
Y e s ( N o ) _
B a r c o d e P r i n t i n g
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
H e a d e r 1
C O M P S E E _ _ _
23
Part 2