Error Messages - LG FE**C3*D SERIES Owner's Manual

Error Messages

Symptoms Reason
Water supply is not adequate in
area.
Water supply taps are not
completely open.
Water inlet hose(s) are kinked.
The filter of the inlet hose(s) are
clogged.
Drain hose is kinked or clogged.
The drain filter is clogged.
Load is too small.
Load is out of balance.
The appliance has an imbalance
detection and correction system.
If individual heavy articles are
loaded (e.g. bath mat, bath
robe, etc.) this system may stop
spinning or even interrupt the
spin cycle altogether.
If the laundry is still too wet at
the end of the cycle, add smaller
articles of laundry to balance the
load and repeat the spin cycle.
Ensure door is not open.
Water overfills due to the faulty
water valve.
Water level sensor has
malfunctioned.
Over load in motor.
Solution
• Check another tap in the house.
• Fully open tap.
• Straighten hose(s).
• Check the filter of the inlet hose.
• Clean and straighten the drain hose.
• Clean the drain filter.
• Add 1 or 2 similar items to help balance
the load.
• Add 1 or 2 similar items to help balance
the load.
• Rearrange load to allow proper spinning.
• Rearrange load to allow proper spinning.
• Close the door completely.
If error is not released, call for service.
• Unplug the power plug and call for
service.
• Close the water tap.
• Unplug the power plug.
• Call for service.
• Close the water tap.
• Unplug the power plug.
• Call for service.
• Close the water tap.
• Unplug the power plug.
• Call for service.
35