Panasonic CF-73 Series Reference Manual page 69

Dealing with Problems (Advanced)
●
Connecting Peripherals (Continued)
A USB device does not work
It is not easy to hear of the
microphone sound
●
Touch Pad
Unable to input using the touch
pad
●
Touchscreen (Only for models with touchscreen)
Unable to input by touching the
display
●
Sound
The sound is not heard
Volume does not change when
Fn + F5 or Fn + F6 is pressed
The audio is distorted
●
Fast User Switching Function
Some applications do not work
properly
●
Make sure a driver is installed.
●
Contact the manufacturer of the product.
●
When is displayed in the Device Manager, try removing and inserting the device
once more. If the problem persists, restart the computer.
1
Windows 2000
Select the on the taskbar.
Windows XP
Select the on the taskbar.
2
Select [Options] - [Properties].
3
Check [Playback] and then add the check mark
select [OK].
4
Select [Options] - [Advanced Controls].
5
Select [Advanced] in [Microphone].
6
Add the check mark
7
Click in the top of right corner of the window.
●
Has the Setup Utility been used to set [Touch Pad] to [Enable]? (
●
When external mouse drivers are installed, the touch pad may not be used.
●
Has the touch pad driver been properly installed?
●
Has the Setup Utility been used to set [Touchscreen] to [Enable]? (
●
When mouse drivers are installed (e.g., Intellimouse), the touchscreen is unable to
be used.
●
Has the touchscreen driver been properly installed?
●
It is necessary to perform [Calibration] to point correctly with the stylus included with
the computer.
●
Try changing the mute by pressing Fn + F4 or Fn + F6 .
●
When [Audio Power Management] in the Setup Utility is set to [Enable], the following
may occur. In these cases, set [Audio Power Management] to [Disable]. (
• Short sounds cannot be heard.
• Sounds are broken up.
• No sound can be heard when playing CDs or other media with sound only on the
right side.
●
If the Windows sound function is not active, the volume will not change even if
displayed.
● Audio distortion may occur when operations are performed by pressing Fn in com-
bination with another key. Stop playing and start again.
Windows XP
●
When switching to a different user with the Fast User Switching function, the follow-
ing problems may occur.
• Some applications may not work properly (for example, PDF files may not be
printed properly).
• It may not be possible to set the settings of the display.
• A serial mouse may not work.
• Wireless LAN may not work.
If any of the above occur, log on with the administrator authority again, not using the
Fast User Switching function, and try the operation once more.
for [Microphone Boost] and then select [Close].
69
for [Microphone], then
⇒ page
54)
⇒ page
54)
⇒ page
54)
is