Panasonic CF-73 Series Reference Manual page 49

Wireless LAN
Setting
At the time of purchase, the profile for the wireless LAN has not been set. Set the profile
using the following procedure.
The settings will vary for different network environments depending on the network system
being used. For more details, ask your system administrator or the person in charge of the
network.
CAUTION
●
Set profiles for each user by following the procedure shown below.
1
Windows 2000
Select [Start] - [Programs] - [Intel Network Adapters] - [Intel(R)
PROSet].
Windows XP
Select [Start] - [All Programs] - [Intel Network Adapters] - [Intel(R)
PROSet].
2
Select your wireless LAN adapter and select [General].
3
Select [On] for [Switch radio].
4
Select [Networks] and select [Add].
5
Enter the profile name and network name, and then make other
necessary changes, then select [Next].
6
Make necessary changes and select [Finish].
NOTE
●
Windows XP
If [Windows XP is currently configured to manage the Intel(R) PRO/Wireless LAN
adaptor.] is displayed, select [Yes].
●
About WLAN Security Client Manager
WLAN Security Client Manager is an implementation of the client side of the IEEE
802.1X-Port Based Network Access Control protocol. 802.1X access control pro-
vides improved security for both wired and wireless networks.
• To start the WLAN Security Client Manager;
Windows 2000
Select [Start] - [Programs] - [Intel] - [WLAN Security Client Manager].
Windows XP
Select [Start] - [All Programs] - [Intel] - [WLAN Security Client Manager].
• For more information about how to use the WLAN Security Client Manager, refer
to the [Help] in the menu bar or;
Windows 2000
Select [Getting Started Guide] or [User's Guide] in [Start] - [Programs] - [Intel].
Windows XP
Select [Getting Started Guide] or [User's Guide] in [Start] - [All Programs] - [Intel].
49