Advertisement
Advertisement
Related Manuals for Echo EchoLink (IR)
Summary of Contents for Echo EchoLink (IR)
-
Page 2: Table Of Contents
CONTENT 1. Accessories Picture 2. Safety Instructions and Precautions 3. Setup and User Instructions 4. Replacement Parts 5. Technical Specifications 6. Conformity EchoLink (IR) Aid for Living Infrared System – Universal Receiver Please read and follow the safety instructions before using the product... -
Page 3: Accessories Picture
Accessories Picture: Receiver Charger Transmitter SCART ① ② ③ ④ 12 VDC Power adapter 6 VDC Power adapter ⑤ ⑥ Headset Phono plugs Neckloop ⑦ ⑧ ⑨ ① ③ ② ⑥ ⑤ ④ ⑦ ⑨ ⑧... -
Page 4: Safety Instructions And Precautions
● Do not use in an environment that is damp, wet, very hot or very cold. ● To clean the EchoLink (IR)TM and its accessories, use only a soft cloth and an inorganic cleaner. ● Only use the Hearing Products approved mains adapter. Do not use any other type of mains adapter. - Page 5 ● Install the unit securely on a stable surface and install the unit where the power cord will not be subject to damage or cause a tripping hazard. ● The unit may get warm when being used. Ensure the unit has adequate ventilation.
-
Page 6: Setup And User Instructions
Setup and User Instructions: 1.Place the EchoLink (IR)TM transmitter (see Fig 1) on top of or next to your TV or fix to the side of the TV with the Velcro pad. (To do this, remove the stand by firmly pulling the transmitter and stand apart). - Page 7 Fig 2 Fig 3 Fig 4...
- Page 8 5.If the SCART connection is not successful, Fig 5 connect the microphone.Simply plug the 3.5mm plug of the microphone cable into the Mic socket on the transmitter (see Fig 5) and then fix the microphone onto the TV speaker using the Velcro. 6.The transmitter base has a switch that allows you to switch between stereo and mono operation.
- Page 9 11.The universal receiver must have a clear and unobstructed view of the transmitter to work properly. 12. When you are finished using the universal receiver turn the volume fully counter clockwise until the ON/OFF LED is off . 13.Place the universal receiver back into the charging cradle. 14.The charge LED will turn RED and when the batteries are fully charged the charge LED will turn green again.
-
Page 10: Replacement Parts
Replacement Parts Version Description 475-1000 EchoLink (IR) TX 475-1002 EchoLink (IR) RX Universal 475-1003 Charging base for universal RX 570-1000 12 VDC 1,500mA power supply (no plug) 570-1008 6 VDCm 1,000mA power supply (no plug) 202/M Omni microphone on a 1.5m lead 306/B phono phono combi lead 201/B... -
Page 11: Technical Specifications
Technical Specifications Single channel 2.3 / 2.8Mhz Stereo or mono mode of operation 1,060mAh LI-ION battery (receiver) (not serviceable by the end user) Volume (dB) 0 ~ -20dB (receiver) Noise cancelation circuit for optimum performance Dimensions: transmitter 115x75x20mm, receiver 90mmX55mmX30mm, charging base 75mmX85mmX 30mm... -
Page 12: Conformity
Hearing Products International Limited for full details www. hear4you.com Hearing Products International Limited Echo House, 26/27 Haigh Park, Stockport, SK4 1QR, England Tel. +44 (0) 161 480 8003 RoHS Fax +44 (0) 161 480 8006 www.hear4you.com...