Operation Manual; Unit Control; Switching On The Unit; Control Panel Indication - Komfovent C3 Installation And Operation Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 18
EN

2. OPERATION MANUAL

2.1. Unit Control

Air handling units control system ensures control of the physical processes that are taking place inside the air
handling unit. Control system consists of:
controller board;
fuses, power and intermediate control boards, which are installed inside the unit;
control panel, which can be installed in the convenient place for the user;
air damper actuators;
pressure and temperature sensors.
Control panel (2.1 Picture) is designed for remote air handling unit control, setting and display of controller pa-
rameters. Control panel LCD display with backlight allows monitoring various parameters and text messages.
Controller light signals indicate unit operation modes and failures. Air temperature, ventilation intensity, opera-
tion modes and other parameters are set by the touch sensitive buttons.
Touch sensitive buttons located on the panel mean:
start up and shut down of the air handling unit / return to previous menu window;
entry to parameters change menu / set parameters confirmation;
navigation in the menu / parameters value change.

2.2. Switching on the Unit

After connecting the unit to the electrical power supply, on the control panel LCD displays start-up window, this
is shown in the Picture 2.3.
Unit is switched on (off) by touching and holding
After switching on, unit will start operating after short delay (about 60 seconds), until air dampers open up, and
fans start running. Unit operation is indicated in the control panel by ventilation intensity and LED signals (see
further).
Do not switch on the unit without connected earthing! Make sure, wheth-
er all unit sections are tightly interconnected.

2.3. Control Panel Indication

Data is presented to the user on the control panel LCD display by numbers and text messages, also by two
colour LED signals.
Controller display start-up window is shown in the 2.3 Picture.
24
General View of the Control Panel
button for 4 seconds till sound confirms the action.
UAB AMALVA we reserve the right to make changes without prior notice
2.1 Picture
C3-16-01-v1

Advertisement

Table of Contents
loading

Table of Contents