Getting started
Power switch
Setting the BEATREVEL S into operation
1
Connect your
BEATREVEL S
2
Turn down the volume with the
BEATREVEL S . The power indicator lights up.
3
Connect your audio device via Bluetooth or an audio cable.
4
Adjust the volume on your audio device and on the BEATREVEL S as needed.
5
Select a light mode.
6
Turn off the BEATREVEL S when not in use.
Selecting a light mode
There are three modes to select from for the disco ball:
: The ball spins and changes color whether there is music playing or not.
ON
: The light is projected to the beat of the music.
BEAT
: The light is off and the disco ball is not spinning.
OFF
to a mains socket using the power adapter.
MASTER LEVEL
Power input
control. Then turn on your
Power
indicator
English
21