Lexus GS460 Owner's Manual page 572

5-2. Steps to take in an emergency
Trunk
Changing "ENGINE START STOP" switch modes and starting the
engine
Put the shift lever in "P" and apply the brakes.
STEP 1
STEP 2
To change the "ENGINE START STOP" switch modes: Within 10
STEP 3
seconds of the buzzer sounding, release the brake pedal and
press the "ENGINE START STOP" switch. Modes can be
changed each time the switch is pressed. (
To start the engine: Press the "ENGINE START STOP" switch
within 10 seconds after the buzzer sounds, keeping the brake
pedal depressed.
If the "ENGINE START STOP" switch still cannot be operated, contact
your Lexus dealer.
572
GS_G_U (OM30C11U)
May 21, 2010 1:06 pm
Turn the mechanical key clock-
wise to open.
Touch the Lexus emblem side of
the electronic key
"ENGINE START STOP" switch.
An alarm will sound to indicate that
the start function cannot detect the
electronic key that is touched to
the "ENGINE START STOP"
switch if any of the doors is opened
and closed while the key is touched
to the switch.
P. 134)

to the