LED World WiFi-103 Installation Instructions Manual page 7

www.ledworldlighting.com
G). DIY Interface
For example:
The Sequence for 10 color boxes is shown above. If the type of changing mode is jump, carry out the
black, red, black, green, black, blue, black, yellow jump changing mode. That is red, green, blue,
yellow strobe changing mode. If the changing mode is gradual, carry out the black,red, black, green,
black, blue, black, yellow gradual changing mode. That is red fade out and fade in, green fade out
and fade in, blue fade out and fade in, yellow fade out and fade in.
H). CT Interface
1). Select Scene:
Select any scene from 1 to 3 on the CT interface,
The corresponding scene changing mode will be displayed immediately. Mode parameters are as
shown on screen above.
2). Save Scene:
On CT (Color Temprature) interface, from the color wheel select color temperature. Click SAVE to
select any scene from 1 to 3, the Scene name prompt box will displayed. Click OK to save current
changing mode as Scene changing mode or click CANCEL to Cancel the Save operation.
Parameter Values
5. WiFi Network SSID Name and Password Setting
In Device list interface, click NETWORK KEY to enter Network interface. Select Change SSID and Password
to enter User Setting interface. New SSID name and password must min 8 characters and consist of 0-9, a-z
and A-Z. Click APPLY button on the top right corner of the interface to save the changes.
7
Copyright © 2015 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).
Brightness adjustment
Long press to delete current color
Mode D1-D8
Jump/Gradual/Strobe switching
12:34 PM
W 50 WW 100
50
Settings
Save Scene
Save
Scene
Scene1 Scene2
CT mode
LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA
12:34 PM 100%
R 255 G 255 B 255 Scene saving
Save
50
Color wheel
Play/Pause
Delete the color
by long pressing
Color select box
DIY MODE BRT SPEED
D2 62% S5
Speed selection
D3 Jump 75% S6
D4 Gradual 87% S7
Brightness selection
Scene Mode DIY Device
DIY interface
100% 12:34 PM
Please enter the scene name
Please enter the scene name W 50 WW
50
Scene1
可修改场景名称
CANCEL
CANCEL
Save
Scene3 Scene1 Scene2
Scene name
WiFi-103 Wi-Controller
100%
100
Modify the Scene Name
OK
OK
Scene3