LED World WiFi-103 Installation Instructions Manual

WiFi-103 WiFi Lighting Control System
Safety & Warnings
This product is intended to be installed and serviced by a qualied licensed electrician. Install in
accordance with the National Electric Code, and local regulations.
Only power with a regulated (listed) constant voltage Class 2 power supply (12-24V DC).
Ensure applicable wire is installed between driver, xture, and any controls in between. When choosing
wire, factor in voltage drop, amperage rating and type (in-wall rated, wet location rated, etc.).
Inadequate wire installation could overheat wires and cause re.
This product is rated for indoor installation and only for dry locations.
Do not modify this product beyond the instructions in this guide or the warranty will be voided.
Wiring diagrams in this installation guide for basic installations. Please carefully review your installation
before proceeding
WiFi-103 is a versatile RGB color control lighting system.
Through WiFi function and mobile devices, the wi-103
can control various types of RGB LED lighting products VIA
iOS or Android.
WiFi-103 lighting control system integrates four functional
controls including; dimming, color temperature adjusting,
and RGB controller. The WiFi-103 can work with the
optional wireless T3 controller and T3-CV Receiving
controller.
WiFi-103 control system supports direct connection or by router:
In directly connection, mobile phone, IOS and Android can directly control the WiFi-103 controller + T3-CV
wireless control, without any third party of network equipment. Optional remote (T3) is available, if software
is not used.
1. Product Parameter:
WiFi-103 Controller
Communication Standard
Input Voltage
Max Current Load
Max Output Power
WiFi Control Distance
RGB Color Change Mode
Scene Mode
Working Temperature
Package Size
Product Size
Weight(G.W.)
1
Copyright © 2015 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).
Before you begin, read all warnings and installation instructions.
2.4 GHz Wi-Fi, 802.11 b/g/n Protocol
DC12V~DC24V (Use only with Class 2 listed regulated power supply)
4A x 3CH Max 12A
144W/288W (12V/24V)
100m
32 xed modes, 8 DIY modes
9 RGB modes, 3 CT (Color Temperature) modes
-20°C ~ 40°C
L135 x W80 x H50mm
L128 × W73 × H45 mm
290g
LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA