Set Time Stamp; Reset To Default Settings; Default Settings And Live Monitoring; Firmware Upgrade - Covert Scouting Cameras Covert Extreme TLV User Manual

Covert Extreme
Press OK to save the current setting and the option will be un-highlighted.
d)
Press MENU to cancel setting and return to info display.

4.1.13 Set Time Stamp

This parameter defines whether the date and time is stamped in the pictures and
video clips or not. The following shows you how to set time stamp as "Off" provided
that the previous value is "On" in MENU state.
e) Press MENU to display the setting menu.
f) Press "▲" or "▼" to select Time Stamp.
Press "►" to select Off.
g)
Press OK to save the current setting and the option will be un-highlighted.
h)
Press MENU to cancel setting and return to info display.

4.1.14 Reset to Default Settings

To reset the setting to the default values, the steps are as follows:
a) Press MENU to display the setting menu.
b) Press "▲" or "▼" to select Reset.
c) Press OK to reset to default settings and return to info display.
Press MENU to cancel setting and return to info display.

4.2 Default Settings and Live Monitoring

Please refer to table 1 for the default settings:
Parameter name
Camera Mode
Photo Size
Photo Burst
Video Size
Video Length
PIR Sensitivity
PIR Interval
Timer Interval
Timer Switch
Flash Range
Time Stamp

4.3 Firmware upgrade

This camera is provides an upgrading function for the users. Upgrading is needed
only when an improved firmware is available.
Upgrade is risky, please be cautious!
4 Advanced Operations
Default
Camera
5M Pixel
1 Photo
640×480
Avi 10 Second
Normal
1 Minute
OFF
Off
15m
On
Table 1: Default settings of the
WARNING
!
Page 12
Other settings
Video
3M Pixel
2 Photos, 3 Photos
320x240
1-60 seconds
High, Low
0-59 seconds, 1-60 minutes
10 seconds to 8 hours
On (00:00 – 23:59)
8m
Off
Camera