System Ddns - Fortinet FortiVoice 200D Reference Manual

system ddns

Use this command to configure the FortiVoice unit to update a dynamic DNS (DDNS) service
with its current public IP address.
Syntax
config system ddns
end
Variable
<ddns-service_str>
domain <domain_str>
ipmode {auto | bind |
static}
Fortinet Technologies Inc.
edit <ddns-service_str>
config domain
edit domain <domain_str>\
set ipmode {auto | bind | static}
set interface <interface_str>
set ip <host_ipv4>
set status {enable | disable}
set type {custom | dynamic | static}
set password <password_str>
set timeout <time_int>
set username <username_str>
Description
Enter one of the following DDNS update servers:
• members.dhs.org
• dipdnsserver.dipdns.com
• www.dnsart.com
• members.dyndns.org
• www.dyns.net
• ip.todayisp.com
• ods.org
• rh.tzo.com
• ph001.oray.net
Note: You must have an account with this DDNS service
provider.
Enter the domain name that is tied to this username and
server.
Select the method of determining the IP address:
auto: Automatically detect the public IP address of the
FortiVoice unit and use that as the IP address to which
domain <domain_str>
bind: Use the IP address of a specific network interface
as the IP address to which
resolve. Also configure
<interface_str>.
static: Use the public IP address to which
<domain_str>
<host_ipv4>.
will resolve.
domain <domain_str>
interface
will resolve. Also configure
Page 88 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
Default
auto
will
domain
ip