Controls - JBL MR-5 Operation Manual

CONTROLS

1 2 5
COMPACT DISC PLAYER
VOL
MOD
MR-5
LOUD
IEQ
SEL
PWR
1 2INT
3 6
1. POWER ON/OFF
Push the button(7) to turn on the unit. Push the button again to turn off
the unit.
2. SELECT Button (3)
1) Audio control ( VOLUME / BASS / TREBLE / BALANCE / FADER )
Press SEL key quickly to select the following features;
"VOL" display - volume control > press key (3)>
"BAS" display - bass tone control >press key (3)>
"TRB" display - treble tone control > press key (3)>
"BAL" display - balance control > press key (3)>
"FAD" display - fader control > press key (3)>
use the VOL knob to adjust. If no adjustment is made or feature is
selected within 5 seconds, the radio automatically switches into volume
level control mode.
These settings are indicated on the display window.
VOLUME Select
FADER
Select Select
9
DETACHABLE SYSTEM
4 45WATTS SCN
LOC DSP
CLS
BD/LD
MARINE
FM3 I07.50
2
3RPT 4RDM 5 6
T/F
MUT
17 18 19
BASS Select TREBLE
BALANCE
Select
8
2) Beep 2nd , I-Vol , Area Selection
When SEL (3) is pressed over 2secs, the unit will be operated as below;
Beep 2nd
Press
Beep 2nd
On the beep 2nd, You Can select the Beep on or Beep 2nd by turning
the spindle knob.
- Beep on : You can hear "Beep" sound when you press any button.
- Beep 2nd : You can hear "Beep" sound when you press a button over 1.5 secs.
I-Vol
Press the SEL button again to access the I- VOL menu.
(Initial Volume Level Adjustment)
You can adjust the I-Vol as desired by turning around the spindle knob.
After the setting of Initial Level, when the unit is powered on, the unit
will revert to the I-Vol setting if the unit was set to a higher volume before
last turning it off. Adjusting this option will control the initial volume level heard
upon turning the unit on avoiding unpleasant or overly loud volume levels.
Area Selection (subject to option)
After the pressing SEL key over 2 secs, select Area (USA / EUR) using the
VOL knob. Press Band button(9) over 2secs to accept.
3.Volume control
Turn left or right the spindle knob (2) to decrease or increase the volume
level. Switching on your radio automatically allows you to set the volume
level without having to select it first. After quickly pressing the SEL key, simply
turn the spindle knob to set the required level of the following:
Bass control
Turn left to lower the bass.
Turn right to higher the bass.
Treble control
Turn left to lower the treble.
Turn right to higher the treble.
Balance control
Turn left to decrease the right speaker volume.
Turn right to increase the left speaker volume.
Fader control
Turn left to decrease the volume level of any loud speakers connected rear to radio.
Turn left to increase the volume level of any loud speakers connected front to radio.
I-Vol Area
Press
9