Table of Contents
Advertisement
Playing a
Before C
Connecti
Basic playback
Basic playback
Basic playback
Others
Others
Connections
Connections
LIMITED W
Connections
Locating a Desired Section
Variable Speed Playback
Connecting to Optional Equipment (Continued)
Connecting to a TV
Toshiba America Consumer Products, Inc. ("TACP"), Toshiba Hawaii ("THI") and Toshiba Canada Limited ("TCL") make the
Connecting
You can enjoy high quality dynamic sounds by connecting the DVD player to
Check the following guide for the possible cause of a problem before contacting service.
This section shows you the basics on how to play a disc.
You can play discs at various speeds, and resume playback from the location
Connect the DVD player to your TV.
following limited warranties. These limited warranties extend to original purchaser or any person receiving this set as a gift
where you stopped playback.
optional audio equipment.
from the original purchaser and to no other purchaser or transferee.
For details of output sound, see
Playing in
Limited Ninety (90) Day Warranty
Symptoms and correction
TACP/THI warrant this product against defects in materials
DVD-V
CD VCD
or workmanship for a period of ninety (90) days after the
Digital Theater S
• For connection to your TV, see "Connecting to a TV"
date of original retail purchase. During this period, TACP/
Symptom
THI will repair or replace a defective product or part, at their
.
Connecting to a TV
18 19
Press REV or
option, with a new or refurbished product or part without
No power.
• For details of output sound, see
Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs and audio CDs are
charge to you. You must deliver the entire product to a
• This section uses the following reference marks.
DVD-V
VCD
Basic playback
divided into tracks. You can quickly locate any specific title, chapter, or track.
TACP/THI Authorized Service Station. You are responsible
The DVD player turned off by
CD
DTS is a high quality surround technology used in theaters and now available for
for all transportation and insurance charges for the unit to
itself.
and from the Authorized Service Station. If you live in the
home use, on DVD video discs or audio CDs.
No picture.
Preparations
U.S.A. you may, at your option, return your DVD Unit to:
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1
• When you want to view a disc, turn on the TV and select the video input connected to the DVD player.
Toshiba America Consumer Products Inc.
channel DTS encoded sound tracks on DVD video discs or audio CDs.
• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected
Title 1
REV
FWD
Returns Center
to the DVD player.
Chapter 1
Chapter 2
1420C Toshiba Dr.
Locating a
Lebanon, TN 37087
No sound.
Upon receipt we will, at our option, exchange the DVD Unit
To S VIDEO OUT
1
Press the power button (POWER).
DVD-V
CD VCD
with a new or refurbished unit. Canadian consumers are
requested to contact TCL. In Hawaii consumers are
POWER
requested to contact THI.
Press TOP M
Limited One (1) Year Warranty
SELECT
TACP/THI further warrant the parts in this product against
defects in materials or workmanship for a period of one (1)
I
When the DVD player is turned on for
Notes
year after the date of original retail purchase. During this
the first time, an on-screen display will appear
The playback picture has
• DO NOT connect the BITSTREAM/PCM (DIGITAL)
1
Set to "I."
period, TACP/THI will repair or replace a defective product
occasional distortion.
to provide initial settings. Press the
AUDIO OUT jack of the DVD player to the AC-3 RF input
or part, at their option, with a new or refurbished product or
DVD-V
VCD
TOP MENU
buttons to select an item, and press the
of a Dolby Digital Receiver. This input on your A/V
part without charge to you, except that if a defective part is
CD
ENTER button. See the pages in
Receiver is reserved for Laserdisc use only and is
replaced after ninety (90) days from the date of the original
make a selection using the
Brightness is unstable or
incompatible with the BITSTREAM/PCM (DIGITAL)
retail purchase you pay labor charges involved in the
noises are present in the
press the ENTER button.
AUDIO OUT jack of the DVD player.
replacement. You must also deliver the entire product to a
playback pictures.
• Connect the BITSTREAM/PCM (DIGITAL) AUDIO OUT
TACP/THI Authorized Service Station. You are responsible
On-Screen Language
Playing frame by frame
The DVD player does not
jack of the DVD player to the "DIGITAL (OPTICAL)" or
for all transportation and insurance charges for the unit to
Connecting to an amplifier equipped with an MPEG2 audio decoder
TV Shape
start playback.
"DIGITAL (COAXIAL)" input of a Receiver or Processor.
and from the Authorized Service Station. If you live in the
After making all the settings, select "
• Refer to the owner's manual of the connected equipment
U.S.A. you may, at your option, return your DVD Unit to:
Press PAUSE/STEP during still playback.
as well.
press the ENTER button.
Toshiba America Consumer Products Inc.
MPEG2 sound
• When you connect the DVD player to other equipment, be
Returns Center
PAUSE/STEP
You can enjoy motion picture and live concert DVD video discs with dynamic
sure to turn off the power and unplug all of the equipment
2
1420C Toshiba Dr.
Press OPEN/CLOSE.
realistic sound by connecting an amplifier equipped with an MPEG2 audio
2
Press
from the wall outlet before making any connections.
Lebanon, TN 37087
decoder or MPEG2 audio processor.
• The output sound of the DVD player has a wide dynamic
want.
Upon receipt we will, at our option, exchange the DVD Unit
OPEN/CLOSE
range. Be sure to adjust the receiver's volume to a
with a new or refurbished unit. Canadian Consumers are
moderate listening level. Otherwise, the speakers may be
requested to contact TCL. In Hawaii consumers are
damaged by a sudden high volume sound.
ENTER
requested to contact THI.
Playback does not follow the
• Turn off the amplifier before you connect or disconnect the
3
Place a disc on the disc tray.
course of the disc's program.
DVD player's power cord. If you leave the amplifier power
Rental Units
Buttons do not work.
on, the speakers may be damaged.
The warranty for rental units begin with the first rental or
thirty (30) days from the date of shipment to the rental firm,
whichever comes first.
The remote control does not
work properly.
Notes
• There are two different disc sizes. Place the disc in
• Refer to the owner's manual of the connected TV as well.
the correct guide on the disc tray. If the disc is out
• When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before
of the guide, it may damage the disc and cause the
making any connections.
DVD player to malfunction.
• If your television set has one audio input, connect the left and right audio outputs of the DVD player to a Y cable adapter (not
• Do not place a disc which is unplayable in this
supplied) and then connect to your TV.
DVD player.
• Connect the DVD player directly to your TV. If you connect the DVD player to a VCR, TV/VCR combination or video selector,
the playback picture may be distorted as DVD video discs are copy protected.
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
18
.
43
Cause
• The power plug is disconnected.
.
43
• The automatic power off function turned
the unit off.
• The TV is not set to receive DVD signal
VIDEO OUT
: Front speaker
Y
output.
DVD video disc
VIDEO
P
B
: Rear speaker
Title 2
REV : Fast reverse playback
SELECT
• The video cable is not connected securely.
P
S
R
Chapter 1
Chapter 2
Chapter 3
FWD: Fast forward playback
I
P
: Sub woofer
Amplifier equipped with
• The equipment connected with the audio
Each time you press the REV or
a DTS decoder
cable is not set to receive DVD signal
(yellow)
(white)
: Center speaker
FWD button, the playback speed
output.
The DVD player turns on and the
changes.
To OPTICAL
To COAXIAL
• The audio cable is not connected securely.
POWER indicator on the player
type digital
type digital
: Signal flow
To VIDEO OUT
audio input
audio input
illuminates.
• The audio receiver or TV is turned off.
• The setting of output sound format is
P
incorrect.
• The disc is dirty.
• It is in fast forward or fast reverse
S video cable
The top menu appears on the TV
playback.
(not supplied)
screen.
/
buttons, then
• The effect of copy protection.
e.g.
TITLE 1
TITLE 2
60
• No disc is inserted.
58
TITLE 3
TITLE 4
• An unplayable disc is inserted.
If the TV has an S video input, connect the
• The disc is placed upside down.
DVD player with an S video cable. When
Each time you press the PAUSE/
using an S video cable, do not connect the
• The disc is not placed within the guide.
STEP button, the picture advances
yellow video cable.
/
/
/
to select the title you
one frame.
The disc tray opens.
• The disc is dirty.
If the titles in the top menu are
• The parental lock function is set.
assigned a number, you can directly
Amplifier equipped with an
locate a specific title by pressing its
• It is in the mode of repeat playback,
MPEG2 audio decoder
memory playback, etc.
designated number with the number
buttons.
• Power supply fluctuations or other
To OPTICAL
To COAXIAL
type digital
abnormalities such as static electricity may
type digital
With the playback
audio input
interrupt correct operations.
audio input
side down.
• The remote control is not pointed at the
remote sensor of the DVD player.
• The remote control is too far from the DVD
player.
• The batteries in the remote control are
exhausted.
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
POWER indicator
Commercial Units
Products sold and used for commercial use have a limited
1
ninety (90) day warranty for all parts and labor.
DVD display
Warning
Correction
Owner's Manual
• When you are connecting (via the BITSTREAM/PCM
You should read the owner's manual thoroughly before
• Connect the power plug securely into the
(DIGITAL) AUDIO OUT jack) an AV decoder that does
wall outlet.
operating this product. You should complete and mail the
not have Dolby Digital, Digital Theater Systems (DTS)
enclosed Demographic card within ten (10) days after you,
• Press the PLAY button.
or MPEG2 decoding function, be sure to set "Audio Out
or the person who has given you this product as a gift,
Select" to "PCM" from the on-screen displays
purchased this product. This is one way to enable TACP to
• Select the appropriate video input mode
AUDIO OUT
To resume normal playback
2CH
BITSTREAM
Otherwise, high volume sound may damage your
/PCM
provide you with better customer service and improved
on the TV so the picture from the DVD
Press PLAY.
hearing as well as the speakers.
products. Failure to return the card will not affect your rights
player appears on the TV screen.
L
VIDEO CD/Audio CD
• When playing DTS-encoded discs (audio CDs),
under this warranty.
• Connect the video cable securely into the
R
PLAY
excessive noise may be output from the analog audio
COAXIAL
OPTICAL
appropriate jacks.
DIGITAL
Track 1
Track 2
output jacks. To avoid possible damage to the audio
Your Responsibility
VIDEO OUT
AUDIO OUT
• Select the correct input mode of the
2CH
BITSTREAM
Y
/PCM
VIDEO
system, you should take proper precautions when the
The above warranties are subject to the following
4
P
B
Press OPEN/CLOSE to close the disc
L
audio receiver so you can listen to the
(red)
SELECT
P
S
R
R
analog audio output jacks of the DVD player are
I
P
conditions:
COAXIAL
OPTICAL
sound from the DVD player.
DIGITAL
tray.
connected to an amplification system. To enjoy DTS
Notes
(1) You must retain your bill of sale or provide other proof of
• Connect the audio cable securely into
Connect either.
Digital Surround™ playback, an external 5.1 channel
• The DVD player mutes sound and omits subtitles during
purchase.
the appropriate jacks.
OPEN/CLOSE
To 2CH AUDIO OUT
DTS Digital Surround™ decoder system must be
reverse and forward scan of DVD video discs.
(2) You must notify a TACP/THI/TCL /Authorized Service
75
coaxial cable
• Turn on the equipment connected with
connected to the BITSTREAM/PCM (DIGITAL) AUDIO
• The playback speed may differ depending on the disc.
Station within thirty (30) days after you discover a
the audio cable.
Optical digital cable
OUT jack of the DVD player.
defective product or part.
• Select the proper audio setting.
(3) All warranty servicing of this product must be made by a
If you insert a DVD video disc that contains a top
TACP/THI/TCL Authorized Service Station.
menu, a menu may appear. See "Locating a title
• Eject the disc and clean it.
3
Press ENTER.
(4) U.S.A. warranties are effective only if the product is
using the top menu."
/
• Sometimes a small amount of picture
purchased and operated in the Continental U.S.A. or
Audio/video cable
You may need to press the TOP MENU or MENU
ENTER
distortion may appear. This is not a
(supplied)
Puerto Rico.
button to display disc menu (depending on the
malfunction.
, and
(5) Labor service charges for set installation. Set up,
actual DVD video disc.)
• Connect the DVD player directly to the
adjustment of customer controls and installation or
To audio inputs
TV. Avoid connecting the DVD player to
repair of antenna systems are not covered by this
a VCR or TV/VCR combination.
warranty. Reception problems caused by inadequate
Notes
Note
• Insert a disc.
antenna systems are your responsibility.
• The instructions above describe basic procedures which
If the disc tray contains a disc you have already played,
To video input
• Insert a playable disc. (Check the disc
(6) Warranties extend only to defects in materials or
may vary depending on the contents of the DVD video disc.
playback will begin from the location where you last stopped
" and
To resume normal playback
type.)
workmanship as limited above and do not extend to any
If different instructions appear on the TV screen, follow those
playback.
29
product or parts which have been lost or discarded by
• Place the disc with the playback side
instructions.
Press PLAY.
down.
you or to damage to products or parts caused by
• If you display the top menu during playback and press the
To start playback in the stop mode
PLAY
misuse, accident, damage caused by Acts of God, such
• Place the disc correctly inside the guide
TOP MENU button again without selecting any title, the DVD
Press PLAY.
as lighting or fluctuations in electric power, improper
on the disc tray.
player may resume playback from the point where you first
installation, improper maintenance or use in violation of
pressed the TOP MENU button (depending on the actual
• Clean the disc.
PLAY
instructions furnished by us; or to units which have
DVD video disc.)
• Cancel the parental lock function or
Note
been altered or modified without authorization of TACP/
• This method of locating a title is available only on a disc that
change the parental lock level.
The sound is muted during frame by frame playback.
THI/TCL or to damage to products or part thereof which
VIDEO OUT
AUDIO OUT
contains a top menu.
2CH
BITSTREAM
Y
/PCM
• These operations may prevent a proper
VIDEO
P
have had the serial number removed, altered, defaced
L
B
• Instruction notes of discs may refer to the button that
progress of the contents.
SELECT
P
R
S
R
I
P
COAXIAL
OPTICAL
or rendered illegible.
DIGITAL
displays the top menu as TITLE button.
• Turn the power on or off with the POWER
(7) Should you elect to return your DVD Unit to TACP after
button. Or disconnect the power plug and
Connect either.
the ninety (90) days and within one (1) year, or after the
insert it into the wall outlet again.
warranty period has expired: Call (800)-631-3811 to
75
coaxial cable
• Point the remote control at the remote
receive information concerning an exchange price.
sensor of the DVD player.
Optical digital cable
Payment must be enclosed with product in the form of a
• Operate the remote control within about
certified check or money order including reason for
7 m.
return.
• Replace the batteries with new ones.
(8) Physically damaged DVD Units are not acceptable for
repair or exchange whether in or out of warranty and
will be returned as received.
TOP MENU
/ / / / ENTER
3
2, 4
PAUSE
PLAY
FWD
REV
PAUSE/STEP
MENU
TOP MENU
/
/ ENTER
"DTS" and "DTS Digital Surround" are
trademarks of Digital Theater Systems,
Inc.
AC IN
• Use DVD video discs or audio
CDs encoded via the DTS
recording system.
Track 3
Track 4
Track 5
• Make the following setting.
On-screen display
Select:
"Audio Out Select"
"Bitstream"
Playback starts.
Recording system
DTS
To wall outlet
30
Playback starts from chapter 1 of the
TV or monitor with
selected title.
(red)
audio/video inputs
(white)
(yellow)
To S video input
• Use DVD video discs encoded via
the MPEG2 recording system.
• Make the following setting.
On-screen display
Select:
"Bitstream"
"Audio Out Select"
Recording system
MPEG
• Make the following setting.
On-screen display
Select:
"Bitstream"
"Audio Out Select"
or
"PCM"
PLAY
STOP
Page
18
27
Signal flow
.
56 59
26
18, 19
26
Page
56
18-23
59
42
26
42, 56
59
9
–
18
26
10
26
26
Page
9
56, 62
56
59
–
42
–
Page
15
56
15
59
15
Advertisement
Table of Contents
