Advertisement
1
Q-Stick Setup
The Q-Stick will now be listed as NorthQ Gateway_XXXX
(where XXXX are the last 4 digits of the Q-Stick serial number)
under Wi-Fi settings. Now connect to the NorthQ Gateway_
XXXX and the install page shown to the right will appear.
Click Install to proceed.
3
iOS and Windows Mobile Users- the setup page should
appear automatically. Otherwise, open a browser and enter
the address http://192.168.0.1
Android Users - a notification should appear in a couple of
seconds asking you to sign in to the network. Click on the
notification. Otherwise, open a browser and enter the address
http://192.168.0.1
Computer Users - open a browser and enter the address
http://192.168.0.1 . The setup page should appear. If it doesn't
happen refresh the page or try with another Internet browser.
6
Advertisement
