Page 3
Welcome Thank you for buying a NorthQ product. Our devices gives you and your family the opportunity to experience a new way of living. This user manual helps you to get Q-Stick installed. • Your Wi-Fi router must support the 802.11N standard in order to install Q-Stick.
Page 5
Connect, Q-Plug and other devices to your HomeManager account. You have to setup the Q-Stick before installing any other NorthQ or other Z-Wave devices. Power it up with the wall plug Alternatively, use the extension chord Upon powering up, make sure the Q-Stick LED flashes blue once to indicate that it is powered on.
Page 6
Q-Stick Setup The Q-Stick will now be listed as NorthQ Gateway_XXXX (where XXXX are the last 4 digits of the Q-Stick serial number) under Wi-Fi settings. Now connect to the NorthQ Gateway_ XXXX and the install page shown to the right will appear.
Page 7
Q-Stick Setup Select your Wi-Fi network If your Wi-Fi is not listed, click here Enter and confirm your password Click SAVE WELL DONE! The Q-Stick setup is done. Remember to re-connect your computer or mobile device to your Wi-Fi network - then proceed to the next chapter.
Page 9
HomeManager is your online platform for all your connected devices, the control center where your consumption data is collected. The Q-Stick is the connection between your NorthQ devices and HomeManager. In order to use it you need to register your personal account.
Page 10
HomeManager Account Creation Open your Internet browser Go to https://homemanager.tv or use the NorthQ app To create your account, click on Register...
Page 11
HomeManager Account Creation Fill out your information All of these should turn green And click on Register After completing these steps you will receive a confirmation e-mail. Click on the link in the e-mail to proceed.
Page 12
HomeManager Account Creation Please fill in this form to identify your house and country. Give your house a name (e.g. Jan’s Home) Choose your house type Select your country Click on Save If your country has several time zones select the correct one.
Page 13
HomeManager Account Creation Follow these steps only if you have a Q-Plug and/or a Q-Power. Otherwise, click on Skip. Fill out your House Budget The House Budget is used for prediction and “spendings comparison”. You should enter the budget amount including taxes/VAT (per your utility bill).
Page 15
Q-Stick Installation To work properly, the Q-Stick has to be recognized by HomeManager. The steps in this chapter show how to do it. Q-Plug HOME MANAGER your device HomeManager your router Q-Stick Q-Power / Q-Gas OTHER Z-WAVE DEVICES...
Page 16
Q-Stick Installation Go to HomeManager menu Select Install...
Page 17
Q-Stick Installation Select Q-Stick Click on Next...
Page 18
Q-Stick Installation Enter Q-Stick serial number Click on Register Gateway Please enter all of the leading “0”.
Page 19
Q-Stick Installation Check if the Q-Stick is registered successfully If not, check FAQ section on northq.com WELL DONE! The Q-Stick installation is done. You can proceed with installing the other devices.
Page 22
A New Way of Living NorthQ ApS Strandvejen 157 | 2900 Hellerup | Denmark email: support@northq.com | website: www.northq.com...