Advertisement
The Q-Stick connects the Q-Power, Q-Gas, Danfoss Living
Connect, Q-Plug and other devices to your HomeManager
account.
You have to setup the Q-Stick before installing any other
NorthQ or other Z-Wave devices.
Power it up with the wall plug
1
Alternatively, use the extension chord
2
Upon powering up, make sure the Q-Stick LED flashes blue
once to indicate that it is powered on. Place it in the middle
of the home in order to obtain the best wireless coverage.
The wireless range is 10-20 meter in houses, but can vary
depending on the building construction.
Before connecting to the Q-Stick go to Wi-Fi settings and click
on the forget network option for your home network so that
it will not auto connect to your existing
the Q-Stick.
Wi-Fi
while installing
1
Q-Stick Setup
5
5
Advertisement
