Kidotec pokky series Assembly Instructions Manual page 9

Step 6: Assembling the baby seat adapter
With four plastic parts, linked four tubes. Make it becomes a closed square.(FIG 8)
Step 7:Assembling the baby seat adapter to the adapter arms
In ride mode, assembling the baby seat adapter to the adapter arms in the rear position as photo(FIG 9)[9.1], until you
hear a "click"(FIG 9)*9.2+. In stroller mode, assembling the baby seat adapter to the adapter arms in the front position
as photo(FIG 10)[10.1], until you hear a "click"(FIG 10)[10.2].
07
assembly