Introduction Congratulations for choosing POKKY. POKKY is a multifunctional lightweight vehicle for parents and children. It is a innovative design aims to improve your daily parental life and make it less restrained and more enjoyable. We wish you and your loved ones much fun and pleasure with your POKKY. If you have any concerns, questions or comments about your POKKY or how to use it, please don't hesitate to contact us.
Warnings Failure to follow all warnings and instructions could result in serious injuiry or death. ➔ Please notice that POKKY is a tricycle. To maintain stability when you riding,please slow down before turning and lean your body into the turn. ➔...
Package Contents The POKKY comes with the following main parts: 1. Rear frame + Right steering handle 2. Front frame + Left steering handle 3. Front wheel (left&right) 4. Arm adapter(left&right) 5. Under-seat Basket 6. One baby seat 7. Baby seat adapter 8.
Page 6
Step 2: Assembling the main frame 1. Loose two screws by hand (FIG 2)[2.1], and pen the converting quick release in middle (FIG 2)[2.2][2.3]. 2. Hold the rear frame with the rear wheel facing up and gently assembling with the front frame. Make sure two trenches from the frame are matches(FIG 3) 3.Make sure you tighten the security screws by hand (FIG 4)[1]and the connecting quick release is properly closed(FIG4)[4.2][4.3].
Page 7
Step 3: Assembling the adapter arms 1. Put down the steering lock lever (FIG 5)[5.1], place the adapter arm in place(See mark "L"&"R",from the rider position) with two screws on the front frame, tighten the arm to the frame with the wrench(FIG 5)[5.2]. 2.Pull out the rear buttons to the release the internal lever (FIG 5)[5.3].
Page 8
Step 4: Assembling the steering post Insert the steering posts to their location and make sure they are positioned at right angles(FIG 6)[6.1]. Close the lever on the steering post (FIG 6)[6.2]. Step 5:Assembling the underseat basket Insert the basket arms into the adapter arms slots as illustrated (FIG 7)[7.1]. Compress the basket arm and slide all the way down until locked in its final position (FIG 7)[7.2].
Page 9
Step 6: Assembling the baby seat adapter With four plastic parts, linked four tubes. Make it becomes a closed square.(FIG 8) Step 7:Assembling the baby seat adapter to the adapter arms In ride mode, assembling the baby seat adapter to the adapter arms in the rear position as photo(FIG 9)[9.1], until you hear a “click”(FIG 9)*9.2+.
Step 8: Assembling the baby seat Put the baby seat into the baby seat adapter(FIG 11). Step 9: Adjusting the saddle Open the lower lever and slide up the bottom seat post to a comfortable height. Then close the lever firmly(FIG 12). assembly...
In the event of a defect, you are requested to first contact your Authorized POKKY Reseller. If the reseller is unable to repair the defect, he will refer you to an Authorized POKKY Service Center or you can contact our customer service by email at info@kidotec.com. warranty&service...
Page 12
Thank you for purchasing POKKY. It is important for us to hear your thoughts. Please feel free to contact us! Email:info@kidotec.com Tel:+86-0571-85390560 Fax:+86-0571-85390561 China office:1/F Building1,XinYe plaza,No.1418-60 MoGanShan Road, Gongshu district,Hangzhou city,Zhejiang provience,China...
Page 13
POKKY series assembly instruction - January 2016...