Wireless Network - D-Link DIR-620 Quick Installation Manual

Multifunction wireless router supporting gsm, cdma, wimax with built-in 4-port switch

Hide thumbs Also See for DIR-620:

Table of Contents

DIR-620

Wireless Network

By default, the wireless network of the router is open (it requires no password to

access it). To avoid unauthorized access to your wireless local area network,

change the default settings of the router.

Example of Wireless Settings

1. Proceed to the Net > Wireless page.

2. Proceed to the Security settings tab.

3. Select the WPA-PSK value from the Network Authentication drop-

down list.

4. Enter a key (a password that will be used to access your wireless

network) in the Encryption Key PSK field. Use only digits and Latin

characters (it is also possible to use the symbols @ (at sign) and –

(hyphen)).

5. Select the AES value from the WPA Encryption drop-down list.

6. Click the Change button.

If you perform initial configuration of the router via Wi-Fi connection,

note that immediately after changing the wireless default settings you will

need to reconfigure the wireless connection using the newly specified

settings.

Quick Installation Guide

Table of Contents