Kenmore 110.21302013 Use And Care Manual page 10

7. Select wash temperature
Cool Warm
Cold Hot
WASH TEMP
9. Press START/Pause/Unlock Lid
to begin wash cycle
CANCEL
Hold 3 Sec.
START
PAUSE
Unlock Lid
Once you select a cycle, select the desired wash temperature
by turning the Wash Temp knob to the desired setting.
Always read and follow fabric care label instructions to avoid
damage to your garments.
Hot
Some cold water is added to save
energy. This will be cooler than
your hot water heater setting.
Whites and pastels
Durable garments
Heavy soils
Warm
Some cold water will be added, so _i Bright colors
this will be cooler than what your _ Moderate to light soils
previous washer provided.
cool i
Warm water is added to assist in _i Colors that bleed
soil removal and to help dissolve _i or fade
detergents.
ili Light soils
cold
iT
Warm water is added to assist in Dark colors that
soil removal and to help dissolve bleed or fade
detergents.
Press the START/PAUSE/Unlock Lid button to start the wash
cycle. Filling is delayed for several minutes while load balance
is sensed. When the cycle has finished, the CYCLE COMPLETE
indicator will light. Promptly remove garments after cycle has
completed to avoid odor, reduce wrinkling, and rusting of metal
hooks, zippers, and snaps.
Unlocking the lid to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/PAUSE/Unlock Lid; the lid will unlock once the
washer movement has stopped. This may take several minutes
if the load was spinning at high speed. Then close lid and press
START/PAUSE/Unlock Lid again to restart the cycle.
If lid is left open for more than 10 minutes, the water will pump
out automatically.
Delay in wafer fill
Filling is delayed for 2 to 3 minutes to check for load
unbalance. You wJJJ hear the hum of the spin prior to filling.
This is normal operation.
8. Select cycle options, if desired
One 2rid
Rinse Rinse Off On
RINSE STAINBOOST
If you would like to add a 2nd Rinse and/or use the
STAINBOOST option, turn the knob for that feature.
The STAINBOOST option provides enhanced cleaning
action for tough stains. It wJH add additional agitation
and soak time to the cycle.
10