Speaker Phone; Pause Feature; Answering A Call; Way Call Function - Audiovox CDM-8910 Owner's Manual

BASIC FUNCTIONS

SPEAKER PHONE

The speaker phone feature lets you hear audio through the speaker and
talk without holding the phone.
C 1 To activate the speaker phone in idle, answering
H
or calling modes, press and hold
2
2
The phone returns to normal (Speaker phone off)
after ending a call or when the phone is turned off
and back on.

PAUSE FEATURE

Pauses are used for automated systems (i.e., voice mail, calling cards).
Insert a pause after a phone number then enter another group of
numbers. The second set of numbers is dialed automatically after the
pause. This feature is useful for dialing into systems that require a code.
1 To insert a pause, enter a phone number then
press [OPTIONS]. Select either a Hard Pause
("P" appears) or a Timed Pause ("T" appears).
2 Press to dial or [SAVE] to store.
Please refer to page 30 for more details about
storing a phone number.
22

ANSWERING A CALL

1
To answer a call, press any key except
or
l By pressing
.
or "Talk Key" to answer a call. lf "Talk Key" is selected, the
phone can only be answered by pressing
See page 88 for more information.
2
To end the call, press
In Auto Answer Mode a call is automatically answered after a
preset number of ring tones. See page 89 for more details.

3 WAY CALL FUNCTION

With Three-Way Calling, you can talk to two people at the same time.
When using this feature, the normal airtime rates will be applied for
each of the two calls.
1
Enter a number you wish to call and press
2
Once you have established the connection,
enter the second number you wish to call and
press
3
When you're connected to the second party,
press
If one of the people you called hangs up during your call, you
and the remaining caller stay connected. If you initiated the call
and are the first to hang up, all three callers are disconnected.
BASIC FUNCTIONS
,
.
, you can select either "Any Key"
.
.
.
.
again to begin your three-way call.
23
,
C
H
2