Vortex Tube, which converts the air inlet into two streams (one hot and one cold). The 129AC series is entirely built in AISI316L stainless steel. 1/4" air nozzle is available as an option for all models.
Page 3
1. Open the housing Loosen the screw at the bottom of the external rail. The screw is fixed to a nut welded on the housing. Screw Air nozzle Vortex tube Washer 2. Unscrew the two M6 screws on the rear flange. Screw Slide the housing outer body away from the back flange.
Page 4
Model Internal Ø 129AC/129ACIR70 81x81x318 Dimensions in millimetres – Tolerances according QMS – Design and product specifications subject to change without notice Preserve this manual as a reference for future needs. Here you can find the always up-to-date pdf version of this document: Used electrical, electronic and stainless steel products should not be mixed with general waste.