System Reset - Sojet ELFIN IH User Manual

5.5.6 System Reset

Click
management interface to enter system
reset management (see Figure 48).
Click to execute system
reset. You need to enter administrator
password for permission to reset
execution (see Figure 49).
Note: System reset is to restore all defaults.
1) Restore all the settings to defaults, clear all data and images.
2) Maintain software version in current version; restore language and font to default.
After system reset, system parameters are as follows:
Item #
1 Language
2 System time
3 Screen saver time
4 Unit
5 Daylight saving time
6 Customer year
7 Date transition time setting
8 Pre-zero in date/time
9 Pre-zero in counter
10 Counter alarm
11 Counter reset
12 Pre-purge
13 Clean printhead
14 Printing direction
15 Channel switch
16 Print Recovery
17 Line speed
18 DPI
19 User permission management
20 Continuous output times
21 Data management
22 Printing delay
23 Printing initial value
on tools
Item
English
Manufacture time
5 minutes
Metric/mm
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Standby
Left-to-right
Left channel
OFF
30m/min
300DPI
OFF
0 OFF
Only system default data Msg001
30mm
Counter initial value and data source current value.
Parameter
(Figure 48)
(Figure 49)
28