Foot Switch; Cable Connector; Ultra/Crunch Selector; Clean Selector - Peavey JSX JSX Joe Satriani Signature All-Tube Amplifier Owner's Manual

F O O T S W I T C H
35
(34)

CABLE CONNECTOR

This seven-pin DIN connector is provided for connecting the footswitch to the amplifier REMOTE
SWITCH (25) via the cable included in the carton. Connections at the switch and the amplifier should
be made before the amp is powered up.
(35)

ULTRA/CRUNCH SELECTOR

This switch selects between the Ultra and Crunch channels on the amplifier. The adjacent LED will
illuminate when the Ultra channel is selected. When the LED is dark, the Crunch channel is selected.
The CLEAN SELECTOR (36) must be in the BYPASS mode to activate either the Ultra or Crunch channel.
(36)

CLEAN SELECTOR

This switch selects the Clean channel and will activate regardless of the position of the ULTRA/CRUNCH
SELECTOR (35). The adjacent LED will illuminate when the Clean channel is selected. This switch must
be in the BYPASS position, indicated by a dark LED, in order to utilize the ULTRA/CRUNCH SELECTOR
(35).
(37) EFFECTS SELECTOR
This switch activates the amplifier's effects loop (21 – 24). The adjacent LED will illuminate when the
effects loop is active.
34
36
9
37