Battery Connection - Duramaxx 90010 Owner's Manual

BATTERY CONNECTION

12 V Systems
1. Connect the positive (+) red lead to the positive (+) battery terminal.
2. Connect the negative (-) blace lead to the negative (-) battery terminal.
NOTE:
If installing a leadwire plug, observe proper polarity and follow instructions in
your boat owner's manual.
WARNING:
• Before connecting battery, make sure the tiller twist handle is in the off
position.
• Use only 6 gauge wire to extend power lead.
• Improper wiring of 12 V system could cause battery explosion!
• Keep leadwire wing nut connection tight and solid to the battery terminals.
• Locate battery in a ventilated compartment.
IMPORTANT:
brands and sizes may vary in performance and abilities. Always read your battery
manufacturers manual for specific battery requirements or contact the manufacturer for
best practices and/or advice.
BATTERY
This is supplied as a quick reference guide however battery types,
9